M6040, M7040, WSM
(2) Lever Combination Switch and Horn Switch (CABIN Model)
Checking Light Switch and Turn Signal Switch
1. Test the continuity through the switch with an ohmmeter.
(1) Turn Signal Switch
(2) Combination Switch
(3) Horn Switch
(4) Light Switch
(5) Combination Switch Connector
(Switch Side)
Checking Connector Voltage
1. Disconnect the lever combination switch connector (1).
2. Measure the voltage with voltmeter across the connector
terminal B1 and chassis, across the terminal B2 and chassis.
3. If the voltage differs from the battery voltage, the wiring harness,
fuses or main switch is faulty.
Main
switch at
"OFF"
Voltage
Main
switch at
"ON"
(1) Lever Combination Switch
9-S37
ELECTRICAL SYSTEM
(a) Right Turn
(b) OFF
(c) Left Turn
(d) OFF
(e) Head Light (Lo)
(f)
Head Light (Hi)
(g) Free
(h) Push
9Y1210143ELS0059US0
Terminal B1 –
Chassis
Approx. battery voltage
Terminal B2 –
Chassis
(2) Combination Switch Connector
(Wire Harness Side)
9Y1210143ELS0060US0
KiSC issued 07, 2012 A