Error Mode - wsm M7060 Workshop Manual

M6060, M7060, WSM

(1) ERROR Mode

Displayed Error Code
ERROR-1
ERROR-2
ERROR-3
ERROR-11
ERROR-12
ERROR-21
ERROR-22
ERROR-23
ERROR-24
ERROR-25
ERROR-60
ERROR-63
ERROR-99
Eng NG
ECU NG
Acceleration sensor (main) trouble
Acceleration sensor (sub) trouble
Acceleration sensor main/sub phase shifting trouble
PTO relay trouble
4-wheel-drive solenoid trouble
Range gear shift (Hi) switch trouble
Range gear shift (6th) switch trouble (Main range gear shift
switch)
Shuttle rotating sensor or switch trouble
Machine speed sensor or switch trouble
DPF regeneration malfunction trouble
Analog reference supply voltage +5 V trouble
Acceleration and engine adjustment trouble
Communication trouble
Engine communication trouble
Tractor ECU communication trouble
When the tractor occurred the below troubles as
shown as the table of next page, the meter panel of this
tractor displays the displayed error codes.
IMPORTANT
• This error codes are the error which corresponds
to the Tractor ECU. DTC codes are not displayed
on the meter panel.
1. When the error code is displayed, do the decided
procedures.
2. After doing the procedure, there is no error code on
the meter panel.
(1) Master System Warning
Indicator
Trouble
8-M23
ELECTRICAL SYSTEM
(2) Error Code
Remarks
Range gear shift (Hi)
switch and Range gear
shift (6th) switch (Main
range gear shift switch)
5V power supply
ERROR
The tractor ECU
memorizes a wrong
data of the acceleration
sensor and engine rev.
CAN Communication
ERROR
Engine trouble, etc.
CAN Communication
ERROR between
Engine ECU and
Tractor ECU
Tractor or Meter ECU
trouble, etc. CAN
Communication
ERROR between
Tractor ECU and Meter
ECU.
9Y1210828ELM0007US0
KiSC issued 08, 2013 A