Vehicle Care Precautions; License Plate Lights - Mitsubishi Mirage 2017 Owner's Manual

• Back-up light bulb
Pull the bulb out.
• Rear turn signal light bulb
Turn the bulb counterclockwise while
pressing in.
Back-up light bulb Rear turn signal light
bulb
6. To install the bulb, perform the removal
steps in reverse.
NOTE
 When mounting the lamp unit, align the
notch (G) and pin (H) on the lamp unit with
the clip (I) and hole (J) in the body.

License plate lights

1. Push the light unit (A) toward the left side
of the vehicle to remove it.
2. Turn the socket (B) counterclockwise to
remove it, and then pull the bulb out from
the socket.

Vehicle care precautions

3. To install the bulb, perform the removal
steps in reverse.
N00944001426
NOTE
 When installing the light unit, first insert the
tab (C) into the hole on the body, and then
push on the light unit to fit it into place.
Vehicle care precautions
In order to maintain the value of your vehicle,
perform regular maintenance using the proper
materials and procedures. Be sure to use only
those materials and procedures that meet your
local environmental pollution control regula-
tions. Choose the materials you will use care-
fully, to be sure that they do not contain
corrosives. If you are not sure, contact an
authorized Mitsubishi Motors dealer for help
in choosing these materials.
Vehicle care and maintenance
9
N00945100166
9-33