Vehicle Care Precautions; License Plate Light - Mitsubishi MIRAGE Service Manual

6. To install the bulb, perform the removal
steps in reverse.
NOTE
 When mounting the lamp unit, align the
notch (G) and pin (H) on the lamp unit with
the clip (I) and hole (J) in the body.

License plate light

1. Remove the screws (A) that hold the light
unit and remove the light unit.
2. Turn the socket counterclockwise to
remove it.
I n f o r ma t i o n P r o v i d e d b y :

Vehicle care precautions

3. Pull the bulb out of the socket.
N00944000403
4. To install the bulb, perform the removal
steps in reverse.
Vehicle care precautions
In order to maintain the value of your vehicle,
perform regular maintenance using the proper
materials and procedures. Be sure to use only
those materials and procedures that meet your
local environmental pollution control regula-
tions. Choose the materials you will use care-
fully, to be sure that they do not contain
corrosives. If you are not sure, contact an
authorized Mitsubishi Motors dealer for help
in choosing these materials.
Vehicle care and maintenance
9
N00945100166
9-31