Theft-Alarm System - Mitsubishi ECLIPSE Owner's Manual

Features and controls

Theft-alarm system

The theft-alarm system is designed to provide protection from
unauthorized entry into the vehicle. This system is operated in
three stages: the first is the "armed" stage, the second is the
"alarm" stage, and third is the "disarmed" stage. If triggered,
the system provides both audible and visual alarm signals.
3
3-22
Armed stage
N00510200068
Park the vehicle and stop the engine. Arm the system as
described below.
1. Remove the key from the ignition switch.
2. Make sure that the engine hood is locked.
3. Lock all doors and the rear hatch or trunk lid by using
power door lock switch or the remote control transmitter.
Arm the system and leave.
NOTE
The system is also armed by locking your vehicle using
the following procedures when you leave the vehicle.
• With either the driver's door or passenger's door open,
set the inside lock knobs on both doors to the locked
position and then close the door.
• With either the driver's door or passenger's door open,
lock all doors and the rear hatch or trunk lid using the
power door lock switch and then close the door.
N00510300069