Armed Stage; Theft-Alarm System (If So Equipped) - Mitsubishi Galant Owner's Manual

Features and controls
Theft-alarm system
The theft-alarm system is designed to provide protection from
unauthorized entry into the vehicle. This system is operated in
three stages: the first is the "armed" stage, the second is the
"alarm" stage, and third is the "disarmed" stage. If triggered,
the system provides both audible and visual alarm signals.

Armed stage

Park the vehicle and stop the engine. Arm the system as
described below.
1. Remove the key from the ignition switch.
3
2. Make sure that the engine hood is locked.
3. Lock all doors by using the remote control transmitter.
Arm the system and leave.
3-20
(if so equipped)
N00510200042
N00510300072
NOTE
The system is also armed by locking your vehicle using
the following procedures when you leave the vehicle.
• With either the driver's door or passenger's door open,
set the inside lock knobs on both doors to the locked
position and then close the door.
• With either the driver's door or passenger's door open,
lock all doors using the power door lock switch and then
close the door.
After completion of the steps above, the theft-alarm indicator
(A) will illuminate for approximately 20 seconds and keeps
blinking on and off, indicating that the system is armed.