Features and controls
Theft-alarm system
The theft-alarm system is designed to provide protection from
unauthorized entry into the vehicle. This system is operated in
three stages: the first is the "armed" stage, the second is the
"alarm" stage, and third is the "disarmed" stage. If triggered,
the system provides both audible and visual alarm signals.
CAUTION
!
Do not modify or add parts to the theft-alarm sys-
tem. Doing so could cause the theft-alarm to mal-
function.
3
3-48
Armed stage
Park the vehicle and stop the engine. Arm the system as
N00510200172
described below.
1. Except for vehicles equipped with the F.A.S.T.-key,
remove the key from the ignition switch.
For vehicles equipped with the F.A.S.T.-key, put the oper-
ation mode in OFF.
2. Make sure that the engine hood is closed.
3. Lock all doors and the liftgate by using the keyless entry
system or the F.A.S.T.-key operation.
Arm the system and leave