13.2.1.9 Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
13.2.1.10 Using the front management LAN connector
In order to use the front management LAN connector to access the iRMC S4
management controller, please proceed as follows:
Ê Ensure that Management LAN has been enabled in the BIOS:
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under iRMC LAN Parameters Configuration, make sure that the
Management LAN setting is set to Enabled.
Ê Save your changes and exit the BIOS.
I
The front management LAN connector can be used to access the
iRMC S4 with either of the Management LAN Port settings enabled,
Management or Shared.
For detailed information on how to access the BIOS and modify
settings, refer to the "D2949 BIOS Setup Utility for PRIMERGY
TX300 S8 / RX350 S8" reference manual.
TX300 S8 / RX350 S8
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
Front panel and external connectors
627