Concluding Steps - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 79: Installing a PSU module
Ê Push the PSU module into its slot (1) as far as it will go until the locking latch
snaps in place (2).
V
CAUTION!
Ensure that the PSU module properly engages in its slot and is locked
in position in order to prevent it from sliding out of the chassis during
transportation.
Ê If applicable, fold down the handle on the PSU module.
6.2.3

Concluding steps

Ê Ensure that all PSU modules have been installed as specified in
page 164.
"Connecting the server to the mains" on page 118
Ê
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Power supply
table 4 on
169