After Replacing / Upgrading Lan Controllers; After Replacing The System Board - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

5.2.19.1 After replacing / upgrading LAN controllers

Please note when re-using a replaced LAN controller:
Ê Confirm with the customer whether the LAN controller you have replaced
has been used as part of a LAN teaming configuration.
Ê If LAN teaming has been active, you will need to restore the configuration
using the LAN driver utility after replacing the LAN controller.
Ensure that the controllers have been assigned as primary or secondary
according to your requirements.
I
For details, refer to the relevant LAN driver manual.

5.2.19.2 After replacing the system board

Ê Confirm with the customer whether the onboard LAN controller you have
replaced has been used as part of a LAN teaming configuration.
Ê If LAN teaming has been active, you will need to restore the configuration
using the LAN driver utility after replacing the system board.
I
For details, refer to the relevant LAN driver manual.
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Basic software procedures
157