7.4.3.4
Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
7.4.4
Replacing the 2x 3.5-inch HDD extension box
Upgrade and Repair Unit
(URU)
Tools: tool-less
7.4.4.1
Preliminary steps
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê Remove all HDD modules from the HDD extension box as described in
section
"Removing 3.5-inch HDD modules" on page
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
TX300 S8 / RX350 S8
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Average task duration:
10 minutes
258.
293