Replacing The Front Lan Connector And Board - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Front panel and external connectors
13.2.2.5 Reinstalling the front panel module
"Installing the front panel module" on page 611
Ê
13.2.2.6 Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:

13.2.3 Replacing the front LAN connector and board

Upgrade and Repair Unit
(URU)
Tools: tool-less
13.2.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 125
Ê
"Locating the defective server" on page 57
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
"Opening the server" on page 68
Ê
630
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
Average task duration:
15 minutes
TX300 S8 / RX350 S8