Removing The Ufm Board - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

System board and components
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page 81
Ê

14.2.2.2 Removing the UFM board

Figure 511: Removing the UFM board (A)
Ê Remove the nylon screw on the defective UFM board (1).
Ê Disconnect and remove the defective UFM board (2).
654 Upgrade and Maintenance Manual
"Opening the server" on
TX300 S8 / RX350 S8