Concluding Steps - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Ê Insert the perforated drive cover modules into drive bays 1 and 2 and
carefully push in until they are flush with the server front (2).
Figure 320: Installing perforated drive cover modules (B)
Ê Close the locking bar until it locks in place.

9.4.2.12 Concluding steps

"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê Reconnect all external cables to the replaced expansion card.
"Connecting the server to the mains" on page 118
Ê
"Enabling SVOM boot watchdog functionality" on page 146
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
TX300 S8 / RX350 S8
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
Expansion cards and backup units
423