Securing A Power Cord In The Psu Cable Bracket - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

4.13.1.2 Securing a power cord in the PSU cable bracket

Figure 69: Securing power cords (A)
Ê Connect the power cords to the power supply units (1).
Ê Run the power cord through the PSU cable bracket as shown (2).
Ê Ensure that the PSU indicator on the PSU module lights up green.
I
For further information on the PSU operation status, refer to section
"PSU indicator" on page
Figure 70: Securing power cords (B)
TX300 S8 / RX350 S8
784.
Upgrade and Maintenance Manual
Basic hardware procedures
121