Mounting The 3.5-Inch Hdd Bay Top Cover - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

7.3.10.6 Mounting the 3.5-inch HDD bay top cover

Figure 189: Mounting the 3.5-inch HDD bay top cover (A)
Ê At a slight angle, fit the HDD bay top cover under the front chassis rim (1).
Ê Fold down the HDD bay top cover (2) until it is properly seated on the HDD
bays.
V
CAUTION!
Ensure that the 4x 3.5-inch HDD backplanes are properly secured in
the upper rim of the HDD bay to cover.
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
281