Removing A Memory Module - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Main memory

10.3.2 Removing a memory module

Ê Identify the desired memory slot according to the mounting order described
in section "Memory sequence" on page
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Basic information" on page
Figure 363: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
I
For lack of space, it is necessary to remove the rear fan modules
(fans 5 and 6) in order to install or remove memory modules in
channels E and F or channels G and H. For further information,
please refer to section
480
468.
"Removing a rear fan module" on page
Upgrade and Maintenance Manual
468.
TX300 S8 / RX350 S8
336.