12X 3.5-Inch Hdd Sas Backplane Cabling - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 157: Mounting order: up to 12x 3.5-inch HDDs (Tower)
7.3.5.2

12x 3.5-inch HDD SAS backplane cabling

I
Before connecting SAS cables to the controller, bend the cables as
needed in order to reduce strain on the controller. Bend the SAS cables
as close to their shrink tubes as possible.
SAS cabling
Cable
(T26139-)
SAS cable
Y3963-V151/V101
SAS cable
Y3963-V151/V101
SAS cable
Y3963-V153/V103
SAS cable
Y3963-V151/V101
SAS cable
Y3963-V151/V101
TX300 S8 / RX350 S8
Cabling
from
list no.
Connector X1 on
16
SAS expander board
Connector X2 on
16
SAS expander board
Connector X3 on
17
SAS expander board
Connector MLC 1 on
16 SAS controller 1 in
PCI slot 10
Connector MLC 2 on
16 SAS controller 1 in
PCI slot 10
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
to
SAS backplane 1
connector X1
SAS backplane 2
connector X1
4x 3.5-inch HDD
extension box SAS
backplane connector
X1
Connector MLC 1 on
SAS expander board
Connector MLC 2 on
SAS expander board
Cabling
plan
16.2.9
16.2.9
251