Concluding Steps - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 333: Routing the BBU cable
Ê Run the BBU cable through the cable guide (G) and along the drive bays as
shown.
9.6.2.4

Concluding steps

"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Installing the SAS expander board" on page 309
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If applicable, update the firmware of the RAID controller that has been
connected to the BBU as described in section
firmware" on page
"Enabling SVOM boot watchdog functionality" on page 146
Ê
TX300 S8 / RX350 S8
137.
Upgrade and Maintenance Manual
Expansion cards and backup units
(if applicable)
"Updating RAID controller
439