Basic hardware procedures
4.10
Closing the server
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX300 S8 / RX350 S8 server must not run while the
top / side cover is removed.
For further safety information, please refer to chapter
●
information" on page
4.10.1 Rack model
4.10.1.1 Installing the rack mounting frame
Figure 46: Installing the rack mounting frame (A)
Ê Fit the rack mounting frame on the server front.
98
45.
Upgrade and Maintenance Manual
"Important
TX300 S8 / RX350 S8