Installing Accessible Drive Dummy Covers - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 206: Removing the HDD extension box
Ê Carefully pull the 2x 3.5-inch HDD extension box out of its installation bays.
Ê Engage the locking bar as described in section
locking bar" on page
7.4.9.3

Installing accessible drive dummy covers

Ê Install accessible drive filler covers into empty drive bays as described in
section "Accessible drive filler covers" on page
Ê Install accessible drive covers into the front cover as described in section
"Accessible drive covers" on page
TX300 S8 / RX350 S8
93.
96.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
"Closing the accessible drive
94.
307