Updating Raid Controller Firmware - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

After replacing the system board
Ê Check the SEL log files as described in section
System Event Log (SEL)" on page 149
the Chassis ID EPROM has been restored to the system board:
Chassis IDPROM: Restore successful
After replacing the Chassis ID EPROM
I
In case of the PRIMERGY TX300 S8 / RX350 S8 server, the Chassis ID
EPROM is integrated on the front panel board.
Ê Check the SEL log files as described in section
System Event Log (SEL)" on page 149
the system board settings has been transferred to the Chassis ID EPROM:
Chassis IDPROM: Backup successful
5.2.3

Updating RAID controller firmware

After replacing the RAID controller, it is essential to upgrade the firmware to the
latest version. The latest RAID controller firmware version is available from the
Fujitsu support web pages at:
http://ts.fujitsu.com/support/
http://jp.fujitsu.com/platform/server/primergy/downloads/
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from firmware updates.
For the Japanese market, follow the instructions provided separately.
Using the ServerView Update Manager
For a detailed description on how to update the RAID controller firmware using
the ServerView Update Manager or Update Manager Express (UME), please
refer to the following manuals:
– ServerView Update Manager:
"ServerView Update Management" user guide
– ServerView Update Manager Express:
"Local System Update for PRIMERGY Servers" user guide
TX300 S8 / RX350 S8
(EMEA market)
Upgrade and Maintenance Manual
Basic software procedures
"Viewing and clearing the
to verify whether the backup data on
"Viewing and clearing the
to verify whether a backup copy of
(Japanese market)
137