Irmc Microsd Card - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

14.5

iRMC microSD card

I
The iRMC microSD card is necessary for using the Embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web frontend.
For further information, please refer to the "ServerView embedded
Lifecycle Management (eLCM)" user guide.
14.5.1 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: tool-less
14.5.1.1 Preliminary steps
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page 81
Ê
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
System board and components
Average task duration:
5 minutes
"Opening the server" on
679