Removing The Multibay Box - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Accessible drives

12.5.2.2 Removing the Multibay box

Ê Remove all cables from the slimline ODD.
Ê Remove the LSD cable from system board connector SMB 1.
Ê Disengage the accessible drive locking bar as described in section
the accessible drive locking bar" on page
Figure 430: Removing the Multibay box
Ê Carefully pull the Multibay box out of its installation bay.
Ê Engage the locking bar as described in section
locking bar" on page
562
93.
Upgrade and Maintenance Manual
91.
"Closing the accessible drive
TX300 S8 / RX350 S8
"Opening