Removing The 3.5-Inch Hdd Bay Top Cover; Tx300 S8 / Rx350 S8 Upgrade And Maintenance Manual - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê

7.3.10.2 Removing the 3.5-inch HDD bay top cover

Figure 178: Removing the 3.5-inch HDD bay top cover (A)
Ê Remove five screws from the 3.5-inch HDD bay top cover (see blue arrows).
Ê Remove one screw from the intrusion switch holder (see orange arrow).
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
273