Removing The 8X 2.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.4.9

Removing the 8x 2.5-inch HDD extension box

Upgrade and Repair Unit
(URU)
Tools: tool-less
7.4.9.1 Preliminary steps
"Suspending BitLocker functionality" on page 125
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê Remove all HDD modules from the HDD extension box as described in
section "Removing 2.5-inch HDD / SSD modules" on page
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
7.4.9.2 Removing the 2x 3.5-inch HDD extension box
Ê Remove all cables from the 2x 3.5-inch HDD extension box backplane.
Ê If applicable, remove all cables from the slimline ODD.
Ê If applicable, remove the LSD cable from system board connector SMB 1.
Ê Disengage the accessible drive locking bar as described in section
the accessible drive locking bar" on page
306 Upgrade and Maintenance Manual
Average task duration:
10 minutes
210.
91.
TX300 S8 / RX350 S8
"Opening