Installing A Memory Module - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

10.2.2 Installing a memory module

Ê Identify the correct memory slot according to the mounting order described
in section "Memory sequence" on page
Figure 360: Installing memory modules (A)
Ê Press out the securing clip at each end of the memory module connector.
I
For lack of space, it is necessary to remove the left rear fan (fan 5) in
order to install or remove memory modules in channels E and F. For
further information, please refer to section
module" on page
Figure 361: Installing memory modules (B)
TX300 S8 / RX350 S8
336.
Upgrade and Maintenance Manual
468.
"Removing a rear fan
Main memory
477