Drawer Limit; Check Change Limit - Sam4s SPS-300 Programming & Operation Manual

Drawer Limit

You can set a limit for cash in drawer. When cash in drawer exceeds the limit you program here, a
warning will display on the screen. You must press CLEAR to remove the warning and continue
operations. The warning will continue to appear at the completion of every transaction with the limit
exceeded, until you use the PAID OUT function to remove cash from the drawer.
Set the drawer limit to 0 to disable the drawer limit warning.
1. From the PGM control lock position menu, press 00 for MORE. The PROGRAM MODE
page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 2 for DRAWER LIMIT. The LIMIT
PROGRAM screen displays:
3. Type the amount you wish to use for a limit (or type 0 for no limit.) Press ENTER (CASH).

Check Change Limit

Use this program to set the maximum amount of cash that can be returned when a check is tendered
for an amount greater than the amount of the sale. For example, if the check change limit is $10.00
the maximum amount that can be tendered into the check key on a $5.00 sale is $15.00.
1. From the PGM control lock position menu, press 00 for MORE. The PROGRAM MODE
page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 3 for CHECK CHANGE LIMIT. The
CHECK LIMIT PGM. screen displays:
3. Type the amount for the check change limit. Press ENTER (CASH).
258 • Program Mode Programming
LIMIT PROGRAM
DRAWER LIMIT
CHANGE LIMIT PROGRAM
CHECK CHANGE LIMIT
0.00
0.00
SAM4S SPS-300 Series Electronic Cash Register AU