Program 1100 - Cash-In-Drawer Limit Programming; Program 1200 - Check Change Limit Programming - Sam4s ER-230 Operation And Program Manual

Program 1100 - Cash-In-Drawer Limit Programming

You can set a limit for cash in drawer. When cash in drawer exceeds the limit you program here, a
warning will display on the screen. You must press CLEAR to remove the warning and continue
operations. The warning will continue to appear at the completion of every transaction with the limit
exceeded, until you use the PAID OUT function to remove cash from the drawer.
Programming the Drawer Limit
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 1 1 0 0, press the SUBTL key.
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
Enter the cash limit,
4. Press the CASH key to finalise the program.
CASH

Program 1200 - Check Change Limit Programming

Use this program to set the maximum amount of cash that can be returned when a check is tendered
for an amount greater than the amount of the sale. For example, if the check change limit is $10.00
the maximum amount that can be tendered into the check key on a $5.00 sale is $15.00.
Programming the Check Change Limit
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 1 2 0 0, press the SUBTL key.
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
Enter the cash limit,
4. Press the CASH key to finalise the program.
CASH
Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
1 1 0 0
up to 8 digits
1 2 0 0
up to 8 digits
SUBTL
X/TIME
SUBTL
X/TIME
Program Mode Programming • 235