No Sale Operations; No Sale - Open Drawer; Non Add # - Add Information - Sam4s SPS-300 Programming & Operation Manual

#/No Sale Operations

The #/NS key has two functions - No Sale and Non Add#. No Sale is used to open cash drawer
outside a transaction, Non Add # is used to enter a reference number for the transaction.

No Sale - Open Drawer

The #/No Sale key will open the cash drawer when you have not already started a transaction. The No
Sale function can be disabled or placed under manager control through programming, see "Function
Key Programming" in the "Program Mode Programming" chapter. All No Sale operations will
be recorded in Journal and/or Electronic Journal for future need, but only a usage counter in Financial
Report.
1. Press #/NS:
2. The drawer will open and the receipt will
print as in the example on the right.

Non Add # - Add Information

You can also use the #/NS key as Non Add # function to enter any number (up to 9 digits) for a
transaction. You can enter the number any time during a transaction. For example, if you wish to
record a checking account number, enter the number and press the #/NS key before totalling the sale
with a tendered key. The Non Add function can be disabled or enforced through programming, see
"Function Key Programming" in the "Program Mode Programming" chapter. All Non Add #
operations will be recorded in Journal and/or Electronic Journal for future need, but only a usage
counter and a sum up number in Financial Report.
1. Register the items you wish to sell.
2. Enter the number you wish to record.
For example enter:
3. Press #/NS:
4. Press CHECK:
CHECK
70 • Operating Instructions
#/NS
1 2 3 4
#/NS
Receipt Example:
DATE 01/05/2012 TUE
NO SALE -------------------------
CLERK 1 No.000045
Receipt Example:
DATE 01/05/2012 TUE
PLU1 T1
NON-ADD#
TOTAL
CHECK
GST
CLERK 1 No.000046
SAM4S SPS-300 Series Electronic Cash Register AU
TIME 08:30
00001
TIME 08:30
$2.99
1234
$2.99
$2.99
$0.27
00001