Sam4s SPS-300 Programming & Operation Manual page 187

Page Field
ACTIVATE OPEN DRAWER
ALARM
3 SECONDS TO ALLOW
DRAWER OPEN (0 - 99)
ALLOW POST TENDER
OPEN DRAWER ON POST
TENDER
ALLOW MULPTIPLE
RECEIPT
4 CASH DECLARATION REQ
BEFORE REPORTS
MGR CONTROL TO TEND.
NEGATIVE BALANCE
MGR CONTROL
TO TEND.
ZERO BALANCE
RESET TRANSACTION #
ON Z REPORT
5 RESET GRAND TOTAL
AFTER Z REPORT
OPEN DRAWER WHEN
REPORTS ARE RUN
OPEN DRAWER DURING
TRAIN MODE
DECIMAL PLACE (0 - 3)
6 DATE FORMAT IS 0:MDY
1:DMY 2:YMD
MODIFIER:
0:POP UP AFTER ITEM
1:POP UP AFTER SALE
2:STAYDOWN
SAM4S SPS-300 Series Electronic Cash Register AU
Value Description
Y or N Select between Y or N to enable or disable open drawer
alarm. See next option for related settings.
When Open Drawer Alarm is enabled, enter the number as
30
the number of seconds before the alarm to go off.
Y or N Select Y to allow re-tendering should a second change
calculation be necessary. Re-enter the tendered amount and
press the CASH key to show the new change computation.
Y or N If you enable post tendering, select N to not open the cash
drawer after the second tender.
Y or N Use this to allow multiple receipt printing. In conjunction
with Print Option - Buffer Receipt Issue when Receipt is
On (pg12) sets to Y, multiple receipt can be issued by press
CASH key as many time as you need.
Y or N Use to determine if Cash Declaration is compulsory before
any reports is made.
Y or N Use to determine if Manager Control is compulsory when
Negative Balance Tendering occurs. When selected the
control lock must be in the X position to finalise the
transaction.
Y or N Use to determine if Manager Control is compulsory when
Zero Balance Tendering occurs. When selected the control
lock must be in the X position to finalise the transaction.
Y or N Use to determine if the Transaction (Receipt) Number is
reset automatically after a Z Financial Report is made.
Y or N Use to determine if the Grand Total on the Financial
Report is reset automatically after a Z Financial Report is
made.
Y or N Use to determine if Cash Drawer opens automatically when
a report is running.
Y or N Use to determine if Cash Drawer opens at the end of
Training Mode transaction.
Enter a number to place the decimal point the selected
2
number of positions from the right.
Use to determine the Date Format between 0 for
1
MMDDYY, 1 for DDMMYY, or 2 for YYMMDD date
printing format.
A MODIFIER key alters the next PLU registered, either by
0
adding the modifier descriptor and not changing the code of
the subsequent PLU, or by changing the code number of the
PLU so that a different item is registered. If you press a
modifier key, you have the option of the modifier applying
only to the next item (0), having the same modifier apply to
any subsequent item registered in the same transaction (1), or
having the same modifier apply to any subsequent item on
any subsequent transaction (2).
Program Mode Programming • 175