PLU Lookup Program
You can assign up to fifteen PLU LOOK UP keys on the keyboard. (See "Function Key
Assignment" in the "Service Mode Programming" chapter). Each of the PLU LOOK UP keys can be
programmed here to list specific PLUs.
1. From the RESET REPORT MODE menu press 5 to select PLU LOOKUP PGM. The
PLU LOOKUP PGM screen displays:
2. Enter the number of the PLU LOOKUP key you wish to program, press ENTER (CASH).
3. With the cursor pointed at the first position of the PLU LOOKUP screen, select a PLU by
typing the PLU number and pressing ENTER (CASH). The descriptor for the PLU will
display, and the cursor will advance to the next position.
4. Continue to select PLUs for the PLU LOOKUP key as necessary. If you are editing an
existing PLU LOOK UP key, press ENTER (CASH) to advance the cursor without
changing the current line.
5. If you wish to remove an item from the PLU LOOKUP key, place the cursor on the line to
be removed, press the VOID key.
6. Press ESC to return to the RESET REPORT MODE menu and save changes.
116 • Z Mode
PLU LOOKUP PROGRAM
PUSH LOOKUP NUMBER
TO BE PROGRAMMED
AND PRESS CASH
(1-15)
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
0
0
0
0
0
0
0
0
0
PLU9
0
0
0
0
0
0
0
SAM4S SPS-300 Series Electronic Cash Register AU