Sd Card Operation; Programs Backup And Restore - Sam4s SPS-300 Programming & Operation Manual

SD Card Operation

Programs Backup and Restore

You can use an SD flash memory card to backup and restore the full program. The program data is
saved in a separate folder named with the default store name "STORE_A" where you can change in
Program Mode
The SD card can also be used to save reports, which can then be viewed on a PC using the SPS-300
PC Utility. The report data is saved in a separate folder named with current date and time.
NOTE: SD cards must be formatted as FAT 32 File Allocation Table format.
If you are Using an SD Card in SPS-300 for the First Time . . .
CAUTION: Formatting the SD card will clear all data on the SD card and prepare it for use.
1. Start Windows Explorer.
2. Select the SD card drive, right click and select Format. (Win XP screen shown; slightly
different procedures are used with different operating systems.)
3. From the Format dialog you must select the
File System: FAT32.
SAM4S SPS-300 Series Electronic Cash Register AU
System Option pg18 (page 18).
Select
"Format..."
Service Mode Programming • 139