Financial Report - Sam4s SPS-300 Programming & Operation Manual

Financial Report

The Financial Report selection from the LOGO DESCRIPTOR PROGRAM screen allows you to
reprogram the descriptors that appear with the Financial Report totals and counters. For example, the
first total on the financial report "+PLU TTL" represents the total of all positive PLU entries. You
might wish to re-label this total to say "FOOD SALES". You can reprogram any of the Financial
Report totals listed here with any 12 character descriptor.
1. From the LOGO DESCRIPTOR PROGRAM screen, press 3 to display the FINANCIAL
REP MESG. Screen:
2. The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at the first
descriptor. Using the alpha numeric keyboard overlay, type the descriptor. Each descriptor
can be up to 12 single space characters. If you make a mistake, press the BACKSPACE key
to erase the previous character. After you have completed typing the first descriptor, press
ENTER (CASH) to accept the new message and advance to the TTL, or press ESC
(CLEAR) to return to the LOGO DESCRIPTOR PROGRAM screen without making any
changes.
3. Press ENTER (CASH) repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next descriptor you wish to program. After the last item on each screen, the screen shifts to
display the next 3 descriptors. (There are 84 Financial Report descriptors that you may
program.) Using the same procedure, continue programming each line as necessary. Press
ESC (CLEAR) at any time to exit and return to the LOGO DESCRIPTOR PROGRAM
screen.
SAM4S SPS-300 Series Electronic Cash Register AU
FINANCIAL REP MESSAGE
LINE 1 :
+PLU TTL
LINE 2 :
-PLU TTL
LINE 3 :
ADJST TTL
Program Mode Programming • 247