Sam4s SPS-300 Programming & Operation Manual page 158

PC Update - Boot Area
Update instructions included with the .bin file will tell whether both Boot Area and
Application Area updates are required. In most cases you may be instructed only to update
the Application Area.
1. Connect the Serial Cable From ECR to PC.
2. At the register, turn the control lock to the S position.
3. Turn the power switch to the OFF position.
4. Press and hold the CASH and CLERK keys. (Use the keys in their default locations, the
upper-right and lower-right keys on the keyboard.)
5. While continuing to hold the CASH and CLERK keys, turn the power switch to the ON
position. (The display will illuminate and the error tone will sound beep-beep-beep in
quick succession.) Release the keys.
6. At the PC, execute the program
"NEWNET_DOWN.exe". The Download dialog
box displays.
7. Select the appropriate com port connection at your
PC at the PORT# option buttons.
8. Click SEL. find the folder where the update files
are located and select S3xxXXXX.bin.
9. Select Boot Area Only in the Select One option
buttons.
10. Press OK Button. The download takes about 30
seconds; the scroll bar will track the progress of the
download. At the ECR, the display will flash
slowly while the update is taking place.
11. When complete, the message Completed displays
on the PC. Click OK and the Download program
will close. At the ECR, a rapid beep-beep-beep will
be heard, and the display will flash rapidly, which
indicates the update is complete.
12. Turn the power switch to OFF on the register, the
Boot Area update is complete. Then follow PC
Update - Program Area steps.
146 • Service Mode Programming
SAM4S SPS-300 Series Electronic Cash Register AU