E.j. Operation - Sam4s SPS-300 Programming & Operation Manual

E.J. Operation

An electronic journal feature is available on the SPS-300. The electronic journal captures the sales
journal in the register memory. If you intend to use the electronic journal, you must allocate sufficient
memory (see "Memory Allocation ".) and activate the journal and set related journal capture options
(see "Program Mode
Use this program to print all or selected parts of the journal memory. Please note, this program will
not clear the electronic journal. See "Z (Reset Report) Mode
the E.J.
1. From the MANAGER MODE menu press 7 to print the electronic journal:
2. Press PAGE DOWN to view the remaining electronic journal options:
3. Type the digit that represents the portion of the electronic journal you wish to print. If you
select 00 for print by clerk, you will be prompted to enter the appropriate clerk number.
SAM4S SPS-300 Series Electronic Cash Register AU
System Option Programming").
ELECTRONIC JOURNAL
0.PRINT ALL EJ
1.PRINT ONLY CASH
2.PRINT ONLY CHECK
3.PRINT ONLY MISC TEND
4.PRINT ONLY %
5.PRINT ONLY RA/PO
6.PRINT ONLY RETURN
ELECTRONIC JOURNAL
7.PRINT ONLY ERR.CORR/VOID
8.PRINT ONLY NOSALE
9.PRINT ONLY CANCEL
00.PRINT BY CLERK
ELECTRONIC JOURNAL
CLERK NO? (1-10)
Reset Electronic Journal" to clear
0
X Mode • 109