Sps-340/345 - Two Station Printer - Sam4s SPS-300 Programming & Operation Manual
Hide thumbs
Also See for SPS-300:
- Operator's and programming manual (298 pages) ,
- Operator's manual (291 pages) ,
- Manual (43 pages)
Table of Contents
Advertisement
3. Ensure that the paper is being fed from the bottom of the roll and then close the paper
cover slowly until it locks firmly.
4. Pass the leading edge of the paper through the cutter slot. Tear off the excess paper.
Replace the printer cover.
SPS-340/345 - Two Station Printer
The SPS-340/345 models are equipped with separate printers for receipt and journal printing. Paper
loading for these models is shown below:
1. Remove the printer cover.
18 • Getting Started
SAM4S SPS-300 Series Electronic Cash Register AU
Advertisement
Table of Contents
