Sam4s SPS-300 Programming & Operation Manual page 135

7. After a while, OK appear on the right side of "RAM (16M)", then "Please Wait ...."
appears last on the display.
8. The display then shows 2-STATION PRINTER : 'CASH' Key 1-STATION
PRINTER : 'CLEAR'.
9. The display then shows AUTO CUT : 'CASH' Key NO CUT : 'CLEAR' Key.
NOTE: AUTO AUTTER can be enable/disable in PROGRAM MODE
SAM4S SPS-300 Series Electronic Cash Register AU
RAM ALL CLEAR
← ← ← ←
RAM (16M)
Please Wait ....
For an SPS-320/325 (one printer station), press CLEAR
For an SPS-340/345 (two printer stations), press CASH
2-STATION PRINTER : 'CASH' Key
1-STATION PRINTER : 'CLEAR' Key
If you want Auto Cutter to be enable, press CASH
If you want Auto Cutter to be disable, press CLEAR
AUTO CUT : 'CASH' Key
NO CUT
OPTION pg 17.
OK
: 'CLEAR' Key
Service Mode Programming • 123
SYSTEM