Endorsement Message - Sam4s SPS-300 Programming & Operation Manual

Endorsement Message

The Endorsement Message is a programming message of up to six lines of 32 single space characters
that prints when a check is endorsed on an optional printer.
1. From the LOGO DESCRIPTOR PROGRAM screen, press 2 to display the
ENDORSEMENT MESG. Screen:
2. Using the alpha numeric keyboard overlay, type the first line of the message. Each line can be
up to 32 single space characters. If you make a mistake, press the BACKSPACE key to erase
the previous character. After you have completed typing the first line, press ENTER (CASH)
to accept the new message and advance to the second line, or press ESC (CLEAR) to return
to the LOGO DESCRIPTOR PROGRAM screen without making any changes.
3. Using the same procedure, continue programming each line as necessary. Press ESC
(CLEAR) at any time to exit. After programming the third line, the fourth, fifth and sixth
lines display:
ENDORSEMENT MESSAGE
LINE 4 :
LINE 5 :
LINE 6 :
4. When the last line has been entered, press ENTER (CASH) to accept the message and return
to the LOGO DESCRIPTOR PROGRAM screen.
246 • Program Mode Programming
ENDORSEMENT MESSAGE
LINE 1 :
LINE 2 :
LINE 3 :
↕
ENDORSEMENT MESSAGE
LINE 10 :
ENDORSEMENT MESSAGE
LINE 7 :
LINE 8 :
LINE 9 :
SAM4S SPS-300 Series Electronic Cash Register AU
↕