Cash-In-Drawer Limit Programming - Sam4s ER-420 Series Operation And Program Manual

Cash-In-Drawer Limit Programming

A Cash-In-Drawer limit can be programmed so that a warning appears on screen when the
limit is exceeded. Pressing the CLEAR key will remove the error. The operator should carry
out a Paid Out operation to reduce the Cash-in-drawer amount.
Programming the Drawer Limit
154 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0 0, press the SBTL key.
1 1 0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalise the program.
CASH
0 SBTL
X/TIME
ER420 Series