Clerk Programming - Reference Information - Sam4s SPS-300 Programming & Operation Manual

Clerk Programming - Reference Information

Page Field
NAME
PASSWORD
DRAWER (0 - 2)
SAM4S SPS-300 Series Electronic Cash Register AU
Value Description
Alpha You can program a descriptor for each clerk. The name you
numeric up program will print on the receipt in place of the default
CLERK #1-99. Type the descriptor using the Program
to 12
character Overlay. The overlay is automatically activated when the
cursor is pointing at the DESC field.
Up to 9 If you are using the code entry clerk system, the number you
digit set here is the number you must use to sign on or clock
in/out. This field - depends on the setting in the System
number
Option - can be used for MCR Card number (first 9 digit) or
Dallas Key Code. When both turned on, MCR Code has
higher priority.
Enter 0 to allow check track operations only. (No cash sales.)
1
Enter 1 or 2 (with the multiple drawer option) to select which
drawer the clerk will open.
Program Mode Programming • 189