Sam4s SPS-300 Programming & Operation Manual page 145

When the function key you want appear on the display, type the key code number you wish to
place and the screen returns to the KEY ASSIGNMENT screen then press ENTER (CASH).
4. The KEY ASSIGNMENT screen displays again, with additional info "PRESS CASH TO
EXIT". Press CASH as Enter to exit.
5. Press the ENTER (CASH) key to finalize current function key assignment, or ESC
(CLEAR) key to cancel the programming.
6. The current function key assignment is finished. The screen go back to SM Mode. If more
function keys are about to be assigned, repeat the procedure from Step 1.
NOTE 1: Numeric keys (0-9), CLEAR/ESC, and CASH/ENTER cannot be removed from
NOTE 2: If you wish to program the CASH/ENTER key, select it immediately after
SAM4S SPS-300 Series Electronic Cash Register AU
KEY NUMBER :
CURRENT ASSIGNMENT
ENTER NEW CODE,
PRESS CASH
PUSH KEY TO BE
PROGRAMMED
PRESS CASH TO EXIT
PRESS CASH TO
SAVE CHANGES
OR
PRESS ESCAPE TO EXIT
WITHOUT SAVING
0.H/W TEST
1.CLEAR ALL TOTALS
2.CLEAR GRAND TOTAL
3.CLEAR PLU FILE
4.FLASHROM INFORMATION
5.MEMORY ALLOCATION
6.KEY ASSIGNMENT
the keyboard unless they have been assigned to a new keyboard location. This
protects the programmer from accidentally removing keys that are required for
register programming and operations.
selecting KEY ASSIGNMENT from the SERVICE MODE menu. After the
initial key is programmed, the CASH/ENTER key is used to finalize the program.
KEY ASSIGNMENT
CONV1
KEY ASSIGNMENT
KEY ASSIGNMENT
SERVICE MODE
337
379
0
Service Mode Programming • 133