Plu Stock - Sam4s SPS-300 Programming & Operation Manual

PLU Stock

If you designate a PLU as an inventory item (see PLU programming) then a special PLU stock
counter keeps a running inventory count. This program is where you can set the current inventory
level.
•
Refer to "System Option Programming" on page 172 to determine whether the quantity of
inventory you enter in this program adds to existing inventory quantity, or whether it replaces
the current inventory quantity.
•
Inventory is kept in decimal units two digits beyond the decimal. For example, if 1.75 pounds
are multiplied times the PLU with the preset price per pound of apples, 1.75 is subtracted
from the PLU representing apples.
To program inventory:
1. From the PGM control lock position menu, press 00 for MORE. The PROGRAM MODE
page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 1 for PLU STOCK. The PLU
NUMBER screen displays:
3. Enter the PLU number and press the PLU key, or press an PLU key on the keyboard. The
stock quantity for the selected PLU displays:
4. Type the new or additional stock quantity and press ENTER (CASH). Note that stock is kept
in decimal units and you must enter new or additional stock to two digits beyond the decimal.
For example, type 1 0 0 0 to enter ten units of inventory.
5. Return to step 2 to continue recording inventory, or press ESC (CLEAR) to return to the
PROGRAM MODE menu.
SAM4S SPS-300 Series Electronic Cash Register AU
PLU NUMBER
* ENTER PLU NUMBER
AND PUSH PLU, OR
* PRESS A PLU KEY ON
THE KEYBOARD
PLU#
STOCK QUANTITY
0
1 P1
0.00
Program Mode Programming • 257