Program 1100 - Cash-In-Drawer Limit Programming
You can set a cash-in-drawer limit. When cash in drawer exceeds the limit a warning will
display on the screen. You must press CLEAR to remove the warning and continue
operations. The warning will continue to appear at the completion of every transaction with
the limit exceeded, until you use the PAID OUT function to remove cash from the drawer.
Programming the Drawer Limit
206 • P-Mode Programming
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 1 0 0, press the SUBTL key.
1
1
0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
0
SUBTL
X/TIME
SAM4s ER-900 Series Operator's & Programming Manual v.1.39