Sam4s SPS-300 Programming & Operation Manual page 220

CHECK # Key Function Options
Page Field
DESC
1
KEY DISABLE
COMPULSORY FOR ALL
SALES
OPENING CLERK HAS
EXCLUSIVE ACCESS
PRINT ON RECEIPT
PRINT ON REMOTE
2
ALLOW ONLY ONE CHK
PER TABLE
CHECK # ASSIGNED BY
REGISTER
DRIVE THRU FEATURE
ENABLED
LENGTH OF CHECK
3
(0-9, 0 : NO LIMIT)
SCAN CHECK #
SHARE CHECK FILE
PRINT CHECK TO THE
SERVER
PRINT CHECK TO THE
SATELLITE
208 • Program Mode Programming
Value Description
Alpha You can program a descriptor. The default descriptor is
numeric up
CHECK #.
to 12
NOTE: You may wish to use TABLE # as the description.
character
Y or N Select Y to disable this function.
Y or N Select Y you must begin a new, or recall an existing tracking
number before registering items.
Y or N If Y, the clerk that begins a tracking number is the only clerk
who can recall a check. If N, any clerk can recall any check.
Y or N If N, the check track number and balance will not print on
the receipt.
Y or N If N, the check track number and balance will not print on
the remote.
Y or N If Y, you can begin only one check with the same table #.
Y or N If Y, press the CHECK. # key to automatically assign the
next sequential check. Check numbers will begin with #1
and continue until the open check report is reset, at which
point the check number will be reset and start at #1 again.
If you wish to implement a drive thru recall key, this setting
Y or N
changes the function of the PBAL key to that of a recall key.
Press the PBAL key directly to automatically recall the open
check with the lowest tracking number
Set the length of check in number of digits. For example, if
0
4, then checks must be used in the range from 1000, to 9999.
This setting applies only to check numbers input by the
operator, not to check numbers assigned by the register.
Y or N Choose Y to allow the check number to be input by a
scanner (must be nine digits or less).
Y or N Choose Y to allow share check file within IRC network. See
SM-Mode, 7.IRC OPTIONS for related settings.
Y or N Choose Y to allow printing Guest Check to the Server
Register. See SM-Mode, 7.IRC OPTIONS for related
settings.
Y or N Choose Y to allow printing Guest Check to the Satellite
Register. See SM-Mode, 7.IRC OPTIONS for related
settings.
SAM4S SPS-300 Series Electronic Cash Register AU