Sam4s SPS-300 Programming & Operation Manual page 296

Page Field
12 DISABLE PRICE LEVEL
KEY
LEVEL 1:
LEVEL 2:
LEVEL 3:
LEVEL 4:
LEVEL 5:
13 PRICE LEVEL IS
0:POP UP AFTER ITEM
1:POP UP AFTER SALE
2:STAYDOWN
ELECTRONIC JOURNAL
14 PROMPT OPERATOR
WHEN EJ BUFFER IS FULL
STOP OPERATIONS WHEN
EJ BUFFER IS FULL
SEND ONLY NEGATIVE
ENTRIES TO EJ
X REPORT AND
DECLARATION SEND TO
EJ
15 SEND RESET REPORT TO
EJ
DIRECT MULTIPLICATION
MORE THAN ONE DIGIT
TENDER VALIDATION
Y:AMT TENDERED
N:AMT OF SALE
16 EUROPEAN ROUNDING
Rounding Rates
284 • Appendix
Value Description
Y or N You can choose to disable Price Level 1 keys.
You can choose to disable Price Level 2 keys.
Y or N
Y or N You can choose to disable Price Level 3 keys.
Y or N You can choose to disable Price Level 4 keys.
You can choose to disable Price Level 5 keys.
Y or N
If you press a price level key, you have the option of the
0
level key applying only to the next item (0), having the same
level key apply to any subsequent item registered in the same
transaction (1), or having the same level key apply to any
subsequent item on any subsequent transaction(2).
Y or N Select Y to enable the electronic journal. The electronic
journal captures in memory what you would print line by line
on a traditional journal. The four options that follow control
the electronic journal feature. The electronic journal can be
read and printed in the X control lock position or reset and
printed in the Z control lock position.
Y or N If the electronic journal is enabled above, select Y if you
wish to display a message to notify the operator when the
journal memory is full.
Y or N If the electronic journal is enabled above, select Y if you
wish to stop operations when the journal memory is full.
Y or N If the electronic journal is enabled above, select Y if you
wish to capture only transactions with negative entries.
Y or N If the electronic journal is enabled above, select Y if you
wish to capture X report and declaration.
Y or N If the electronic journal is enabled above, select Y if you
wish to capture reset reports.
Y or N If you allow direct multiplication of a preset PLU, you can
allow only single digit multiplication or multiplication by
more than one digit.
Y or N Validation is allowed if an appropriate optional printer is
connected to an RS-232C port. Here you can choose the
content of single line validation
Y or N Select Y to enable European Rounding system.
Enter the high amount of the first range where you are
prompted. The low amount of the next range will be
computed automatically.
SAM4S SPS-300 Series Electronic Cash Register AU