Rs232C Settings Screen Program Notes - Sam4s SPS-300 Programming & Operation Manual

RS232C Settings Screen Program Notes

Page Field
1 BAUD RATE
PARITY
DATA BITS
2 STOP BITS
DEVICE FUNCTION
3 INITIAL FEEDING LINE ON
KP (0-20)
ENDING FEEDING LINE ON
KP (0-20)
INITIAL FEEDING LINE ON
SLIP (0-20)
4 PRINT LINE ON GUEST
CHECK (0-50)
SCALE TYPE
4 ~ 7 PRINTER TYPE
8 POLE DISPLAY TYPE
EFT TYPE
138 • Service Mode Programming
Description
Select proper baud rate from the list. COM#1 defaults to 6
(57600), COM#2~#4 default to 0 (9600).
Select between 0 (NONE), 1 (EVEN), or 2 (ODD) from list.
0 (NONE) is default.
Select 0 (8) or 1 (7) from the list. 0 (8) is default.
Select 0 (1) or 1 (2) from the list. 0 (1) is default.
Enter the number represents the device you wish to attach to
this port from the list. COM#1 and #4 default to 1 (PC),
COM#2 and #3 default to 0 (NONE)
Some device function has related feature to select as well:
2 (SCL - Scale) SCALE TYPR (pg4)
3 (RJ - Remote Journal)
4 (RP - Remote Printer)
8 (EFT - EFTPOS)
market)
9 (POLE - Pole Display)
(pg8)
Enter the number as the number of lines will be advanced
before the content of KP starts to print when a external
printer (RP - Remote Printer) is used.
Enter the number as the number of lines will be advanced
after the content of KP has been printed when a external
printer (RP - Remote Printer) is used.
Enter the number as the number of lines will be advanced
before printing starts on a new slip when a slip printer is
used..
Enter the number of lines that represent the maximum that
can be printed on a single guest check.
When DEVICE is 2 (SCL), select the scale protocol by enter
the number represent the interface on this port.
When DEVICE is 3 (RJ) or 4 (RP), select the printer driver
by enter the number represent the printer model on this port.
When DEVICE is 9 (POLE), select the pole display protocol
by enter the number represent the protocol on this port.
Select the digit that represents the EFT type connected to this
port.
SAM4S SPS-300 Series Electronic Cash Register AU
PRINTER TYPE (pg4 - 7)
PRINTER TYPE (pg4 - 7)
EFT TYPE (pg8) (not for AU
POLE DISPLAY TYPE