Sam4s SPS-300 Programming & Operation Manual page 204

NON ADD # / NO SALE Key Function Options
Page Field
DESC1
1
DESC2
KEY DISABLE
UNDER MGR CONTROL
INHIBIT NO SALE AFTER
NON-ADD #
PRINT NON-ADD# ON
HARD CHECK
ENFORCE # ENTRY AT
2
START OF SALE
PRINT ON N/S
NON-ADD # PROHIBIT
COMP NON-ADD # MUST
MATCH MAX DIGIT
MAX DIGIT (0-8)
192 • Program Mode Programming
Value Description
Alpha You can program a descriptor for the no sale function. The
numeric up default descriptor is NOSALE.
to 12
character
Alpha You can program a descriptor for the non add # function.
numeric up The default descriptor is NON ADD #.
to 12
character
Y or N Select Y to disable this function.
Y or N Select Y to allow operation only in manager operation mode.
Y or N Select Y if you want disable the NO SALE function after a
non-add number is entered.
Y or N
Y or N Select Y if you wish to enforce the entry of a non-add
number at the beginning of each transaction. (For example,
to track the number of customers in each sale, or to identify a
customer number with each sale.)
Y or N Select N to stop printing when a NO SALE is performed.
Y or N Select Y to disable the non-add # function.
Y or N Select Y if you wish all non-add number entries to have the
exact number of digits selected in the MAX DIGIT flag
below.
Enter the maximum number of digits for non-add number
0
entry. Zero (0) means no limit.
SAM4S SPS-300 Series Electronic Cash Register AU