Group Programming - Reference Information - Sam4s SPS-300 Programming & Operation Manual

3. To browse through the options:
•
Press ENTER key to move " " symbol option by option, or
•
press PAGE UP or PAGE DOWN for fast browsing page by page.
4. When reaching the option you want to modify:
•
For descriptor programming options, the keyboard will change to Program Overlay,
enter the character you need up to 12 characters. Or enter Descriptor Code to make up the
description you want.
NOTE: System Option is default to Program Overlay. Please check setting on page 17
•
For numeric programming options, enter the number through numeric pad,
•
For Yes/No programming options, press YES/NO key to toggle between Y and N
5. Refer to the table below to fill the fields of the GROUP PROGRAMMING screens.
6. Press ENTER (CASH) to return to the GROUP PROGRAMMING screen. Continue to
program groups as necessary. Press ESC (CLEAR) to return to the PROGRAM MODE
screen.

Group Programming - Reference Information

Page Field
1 DESC
ADD TO GROUP TOTAL
SEND TO KP
SAM4S SPS-300 Series Electronic Cash Register AU
GROUP #1 PROGRAMMING
SEND TO KV
KV GROUP#(0-16)
KV COLOR(0-16)
AGE VERIFICATION (0-5)
Value Description
Alpha You can program a descriptor for each group. Type the
numeric 12 descriptor using the Program Overlay. The overlay is
character automatically activated when the cursor is pointing at the
DESC field. The default descriptors are GROUP 1,
GROUP 2, etc.
Y or N Use this to determine if the sales total of this group is going
to be added into Group Total which will update the total of
Group Report.
Y or N In a café or restaurant environment, use this to determine if
the items linked to this group print to a remote printer as a
Kitchen Printer.
NOTE: Even set this option to Y, it will not work unless this
N
0
0
0
group is the first group that a PLU is linked to.
Program Mode Programming • 163