Function Key Programming - Sam4s SPS-300 Programming & Operation Manual

Function Key Programming

This Function Key Programming allows to program function key name, and status available. A
function key can not be programmed unless has been assigned on the real keyboard or on one of the
two Func Lookup (Function Key Look Up) keys.
1. From the PGM control lock position menu, press 5 for FUNCTION KEY. The FUNCTION
KEY PROGRAM screen displays:
2. Select the function key you want to program,
•
Press the function key on the keyboard,
or
•
When the function key you want to program locates on one of the Func Lookup keys,
press the Func Lookup key, press 1 to select 1.STATUS PROGRAM, then press the
number on the numeric pad for the function key you want to program.
0.MENU ASSIGNMENT
1.STATUS PROGRAM
3. To browse through the options, press ENTER key to move " " symbol option by option.
4. When reaching the option you want to modify,
•
For descriptor programming options, the keyboard will change to Program Overlay,
enter the character you need up to 12 characters. Or enter Descriptor Code to make up the
description you want.
NOTE: System Option is default to Program Overlay. Please check setting on page 17
•
For numeric programming options, enter the number through numeric pad,
•
For Yes/No programming options, press YES/NO key to toggle between Y and N
190 • Program Mode Programming
FUNCTION KEY PROGRAM
PUSH FUNCTION KEY TO
BE PROGRAMMED
FUNC #1 PROGRAM 1.CANCEL
2.MDSE RETURN
3.RA1
4.PO1
5.TIP
6.TAXEXMT
7.CONV1
8.TIME IN/OUT
SAM4S SPS-300 Series Electronic Cash Register AU